Shopping Cart now in your cart 0 items
Lambo Door Kits
Select

BMW Lambo Door Kits

Select your model
Universal Lambo Door Kit 90 Degree LamboDoor
Universal Lambo Door Kit 90 Degree

Listing Price: $289.99

Selling Price: $199.99

Quantity

2 Door Shaved Door Handle Kit 45LB
2 Door Shaved Door Handle Kit 45LB

Listing Price: $217.49

Selling Price: $149.99

Quantity

4 Door Shaved Handle Kit
4 Door Shaved Handle Kit

Listing Price: $385.69

Selling Price: $265.99

Quantity

Aluminum Universal Lambo Door Kit
Aluminum Universal Lambo Door Kit

Listing Price: $260.99

Selling Price: $179.99

Quantity

2X Power Door Lock Actuator
2X Power Door Lock Actuator

Listing Price: $34.79

Selling Price: $23.99

Quantity

BMW 7 Series Lambo Door Kits OEM and Aftermarket

BMW 7 Series Lambo Door Kits OEM and Aftermarket

There are two types of BMW lambo doors available. They include Bolt on lambo doors and universal limbo doors. Bolt on kits are specifically made for the given car application while universal kits are not. Therefore, the former are generally more expensive than the latter. BMW 7 series lambo door kits are quite far up. If you ever wanted to have doors that swing up and not out, now is the perfect time because we have the most exclusive BMW 7 series door kits in the market! Our BMW 7 series lambo door kits are an easy installation to have. The new door hinges replace the OEM Bimmer hinges and the doors swing lightly outward and then rotate upward after the kit has been installed. The BMW 7 series lambo doors open horizontally, and then lift vertical at a forward angle. The lambo look is associated with stylish and speedy cars. The BMW 7 series lambo door kits are specifically designed for this model. One gets a professional to do the overhauling or they can do it themselves. There are various modification kits, each with their own unique instructions, but the installation and design concepts remain the same. Firstly, remove the encompassing exterior panels and bumper. Secondly, remove the existing swing arms and door hinges. Thirdly, replace them with the shock absorbers and the kit’s hinges. Fourthly, ensure their clearances and movements. Fifthly, weld and/ or bolt them permanently. Sixthly, put the panels and bumper back on and finally clean up! This whole procedure takes about a whole day to complete. More specific details are enumerated as follows: Firstly, remove the front bumper and side skirts. The hinges for both the doors will then be accessible. Subsequently, do one side at a time until it’s finished or at least until the final lubrication and welding. Then clear with the other side. Secondly, remove the doorstopper. This short metal rod restricts the door’s movement. Thirdly, close door and lock it. Tape it into position. Fourthly, remove the old hinges and fit the new ones onto the base and door. Fifthly, remove the tape. Open the door and ensure that it swings without interference. One may need to extend the length of the door’s electrical wires. Sixthly, install the shock absorber. Check that the door moves in the manner prescribed. Fine tune and adjust any setscrews for optimum performance. When satisfied, tighten up all the bolts. Optionally, one can also cement or weld them in place. One has to be careful that they do not subject the nearby areas with the heat source and therefore a welding deflection paper would be in handy. The moving parts of the door should be lubed with waterproof grease. The same procedure should be repeated for the other side. Lastly, reinstall the side skirts and bumper and then go cruising to show off your fine styling work! The product and company that is right for you is one that will give you the best value for your money. We stand behind our products and our service. We strive to provide you with a superior BMW 7 series lambo door kits at very competitive pricing and excellent customer service.