TAKATA 4 Point Racing Seat Belt

4 Point Seat Belt Harness by Takata

Takata leading restraint manufacturer in the auto industry. These seat belts are used in Formula one and pro racing. Valid until 2015.

Specifications: 3 Inch Wide Harness 4 Point Cam Lock with Quick Release 4 pcs 3/8 Grade Mounting Hardware Included 1 set = 4 harness + Bolts Meet Compeition & Regulations Standards

Instructions:

Remove original bolt attaching seatbelt on driver side. Replace original bolt with eyebolt provided by Takata. Eyebolt should be facing seat.  

Remove original bolt attaching seatbelt buckle on console side. Replace original bolt with eyebolt provided by Takata. Eyebolt should be facing seat.

Remove original bolt attaching seatbelt/buckle on driver side in rear seat.Replace with eyebolt provided by Takata.

Remove original bolt attaching seatbelt / buckle at mid point in rear seat.Replace with eyebolt provided by Takata.

Thread Takata harness shoulder belts through seat as shown.
Cross belts behind seat.
Belts should pass through inner portion of headrest or be threaded through openings in seat if openings are available.

 Attach tongues of harness to eyebolts as shown, making sure that fasteners are in closed position when installed.

Check angle of installation and position of shoulder belts to make sure position is within recommended limits.

Adjust belts to fit properly when seated.Belts should be free and clear of any potential snags, should not encumber the neck, and should not twist when worn.